Flip Pro 12V pesa

Flip Pro 12V Power Socket takes onboard power delivery to a new level, featuring a IPX4 spring loaded lid, and an impressive 150W max power on a 12V system.

32.00 €
Lisa korvi
Lisa lemmikutesse

Scanstrut DS-HD10-BLK läbiviik 2 x 6-10 mm

he DS-HD10-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for roof top lights and electronics. Our seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time.

54.00 €
Lisa korvi
Lisa lemmikutesse

Scanstrut DS-HD6-BLK läbiviik 2 x 5-6 mm

he DS-HD6-BLK double horizontal cable seal was designed to eliminate time-consuming and sub-standard routing of cables for roof top lights and electronics. Our seal helps you achieve a sleek, easy-to-fit, and 100% watertight installation every time.

38.00 €
Lisa korvi
Lisa lemmikutesse

Scanstrut DS30-P-Black Läbiviik ø9-14mm

Kaablitele läbimõõduga 9–14 mm ja pistikutele kuni Ø30 mm.

Esteetilise kuplikujulise profiiliga korpus on vastupidavam löökidele, ning aluses sees olevad mutrid muudavad paigalduse lihtsaks.

41.00 €
Lisa korvi
Lisa lemmikutesse

EL-teip must 10m

Värv: Must
Pikkus: 10 m
Laius: 19 mm
Tugev, leegikindel ja veekindel PVC-teip.
Temperatuurikindlus vahemikus -20°C kuni 80°C.
Pingetaluvus kuni 600 V.
RoHS, CE

2.00 €
Lisa korvi
Lisa lemmikutesse

EL-teip valge 10m

Värv: Valge
Pikkus: 10 m
Laius: 19 mm
Tugev, leegikindel ja veekindel PVC-teip.
Temperatuurikindlus vahemikus -20°C kuni 80°C.
Pingetaluvus kuni 600 V.
RoHS, CE

2.00 €
Lisa korvi
Lisa lemmikutesse

Kaabliühendus 2pin

Kuni 10A

9.00 €
Lisa korvi
Lisa lemmikutesse

Kaabliühendus 3pin

Kuni 10A

11.00 €
Lisa korvi
Lisa lemmikutesse

Kaabliühendus 4pin

Kuni 10A

13.00 €
Lisa korvi
Lisa lemmikutesse

Blue Sea CableClam 0.68" läbiviik

Provides a waterproof pass-through for antenna cables without requiring removal of the factory installed connector

  • Pre-drilled and slit rubber seals for easier installation.
  • A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
  • Stainless steel fasteners included
  • For use above the waterline only

30.00 €
Lisa korvi
Lisa lemmikutesse

ScanStrut DS-H10-BLK läbiviik

For cables from 6-10mm (0.24”-0.39”) - Perfect for solar panels, light bars, lights and other rooftop electronics.

29.00 €
Lisa korvi
Lisa lemmikutesse

ScanStrut DS-H6-BLK läbiviik

For cables from 2-6mm, an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

20.00 €
Lisa korvi
Lisa lemmikutesse

ScanStrut DS16-P Black läbiviik

For cables from 2-8mm (0.08"-0.35"), connectors up to Ø16mm (0.63") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

26.00 €
Lisa korvi
Lisa lemmikutesse

ScanStrut DS16-S läbiviik (roostevaba)

For cables from 2-8mm (0.08"-0.35"), connectors up to Ø16mm (0.63") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

56.00 €
Lisa korvi
Lisa lemmikutesse

Index Marine DG21 Black läbiviik

The DG21 cable gland is designed as an attractive low profile shape with IP68 rating which ensures a perfect waterproof solution for various cable management applications.  Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. The tapered seal ensures that the hole closes completely, creating a watertight seal around the cable. Ideal for electrical cabling applications and ducting through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations. 3 preformed bungs included for pass-through cable sizes 4-9 mm. (No drilling required). Max connector size: 21 mm

22.00 €
Lisa korvi
Lisa lemmikutesse

Index Marine DG45 Black läbiviik

The DG45 cable gland is designed as an attractive low profile shape with IP68 rating which ensures a perfect waterproof solution for various cable management applications.  Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. The tapered seal ensures that the hole closes completely, creating a watertight seal around the cable. Ideal for electrical cabling applications and ducting through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations. Preformed bungs included for pass-through suitable for cable sizes 12-15mm. (No drilling required). Max connector size: 41 mm

25.00 €
Lisa korvi
Lisa lemmikutesse

Index Marine SE1 Black läbiviik

The SE1 side entry cable gland is the perfect solution when space is limited. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. The tapered seal ensures that the hole closes completely, creating a watertight seal around the cable. Ideal for electrical cabling applications and ducting through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations. Preformed bungs included for pass-through suitable for cable sizes 2-7mm

13.00 €
Lisa korvi
Lisa lemmikutesse

Index Marine SE7 Black läbiviik (double)

The SE1 side entry cable gland is the perfect solution when space is limited. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. The tapered seal ensures that the hole closes completely, creating a watertight seal around the cable. Suitable for two cables 3 – 6mm diameter cables through bulkheads, decks, and panels – i.e. VHF, Satnav, GPS and Radar installations. Preformed bungs included for pass-through suitable for cable sizes 2 x 3-6mm

24.00 €
Lisa korvi
Lisa lemmikutesse
Sale

ScanStrut DS21A-P Black läbiviik

For cables from 4-9mm (0.15"-0.35"), connectors up to Ø21mm (0.82") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

Algne hind oli: 42.00 €.Current price is: 31.00 €.
Lisa korvi
Lisa lemmikutesse
Sale

ScanStrut DS21A-S läbiviik (roostevaba)

For cables from 4-9mm (0.15"-0.35"), connectors up to Ø21mm (0.82") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

Algne hind oli: 74.00 €.Current price is: 57.00 €.
Lisa korvi
Lisa lemmikutesse

ScanStrut DS30-S läbiviik (roostevaba)

For cable from 9-14mm and connectors up to Ø30mm. Made from 316 Stainless Steel, the aesthetic dome-shaped profile provides a stronger, impact-resistant design, and captive nuts in the base make for an easy assembly.

88.00 €
Lisa korvi
Lisa lemmikutesse

ScanStrut DS40-S läbiviik (roostevaba)

For cables from 12-15mm (0.47"-0.59"), connectors up to Ø40mm (1.57") an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

88.00 €
Lisa korvi
Lisa lemmikutesse
Sale

Würth Crimping Tool

  • Compact lightweight design
  • With force stop function for reliable crimping (can be unlocked)
  • High crimping force thanks to efficient transmission ratios
  • Length: 215 mm
  • Material: Tool steel

Algne hind oli: 137.00 €.Current price is: 90.00 €.
Lisa korvi
Lisa lemmikutesse

Termokahanevate kummitorude komplekt 280tk

Professional shrink tubing assortment with 8 compartments and a total of 280 parts. Delivered in a sturdy, black plastic box. Overall dimensions: 195 x 160 x 35 mm. Diameters 1.2 - 9.6 mm, lengths 40-75mm.

18.00 €
Lisa korvi
Lisa lemmikutesse

Juhtme jätk 6.3 20tk

Laius 6.3mm Max 15A

2.00 €
Lisa korvi
Lisa lemmikutesse

Juhtmeotsik female 6.3 kaetud 20tk

Laius 6.3mm Max 15A

3.00 €
Lisa korvi
Lisa lemmikutesse

Juhtmeotsik male 6.3 20tk

Laius 6.3mm Max 15A

3.00 €
Lisa korvi
Lisa lemmikutesse

Blue Sea CableClam kaabli läbiviik

Provides a water resistant side entry for antenna cables without requiring removal of the factory installed connector. Stainless steel dress cap conceals mounting hardware and matches stainless steel deck fittings.

  • Simple one-piece design for easy side mount installations
  • Low profile, contoured edge reduces the risk of tangling lines
  • A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
  • Includes all fasteners
  • For use above the waterline only

17.00 €
Lisa korvi
Lisa lemmikutesse

12v pesa seinale 2x

18.00 €
Lisa korvi
Lisa lemmikutesse
,

12v pesa

Süvistatav

7.00 €
Lisa korvi
Lisa lemmikutesse