“Victron Energy SmartSolar MPPT 250/70-Tr VE.Can” has been added to your cart.
“Exide Dual AGM EP600 70Ah/760A” has been added to your cart.
“Nautic Clean 17 puhastab ja taastab tiigipuitu STEP 1 1L” has been added to your cart.
“Seajet 034 Emperor Professional 5L must” has been added to your cart.
“Hook & Moor tark pootshaak M45 1.8m” has been added to your cart.
“Outils Oceans fallitasku 31x30x10cm” has been added to your cart.
“Lipuvarras mahagon 125cm” has been added to your cart.
“Aqua Marina Race uim” has been added to your cart.
“Poly Ropes FLAT vendriots 12mm hall 2tk” has been added to your cart.
“Hella APELO A3 Bronze RGB” has been added to your cart.
“Roostevaba liist – kulumiskaitse 203x19mm” has been added to your cart.
“Paadisilla vender 1m hall” has been added to your cart.
“Victron Energy 90Ah 12V Deep Cycle AGM” has been added to your cart.
“Jobe SUP Paddle Float Support” has been added to your cart.
“Vender Heavy Duty 3 20×75 Anthracite” has been added to your cart.
“Berker Lüliti double (valge)” has been added to your cart.
“Navigeerimise vahendite komplekt” has been added to your cart.
“Kaabliühendus 3pin” has been added to your cart.
“Vender Heavy Duty 3 20×75 Anthracite” has been added to your cart.
“Seajet 034 Emperor Professional 5L must” has been added to your cart.
“Berker pistikupesa raam tumehall” has been added to your cart.
“FenderFits vendrisukk K7 / F5 must 2tk” has been added to your cart.
“Seajet 117 Multipurpose Epoxy Primer 1L” has been added to your cart.
“Victron Energy 130Ah 12V Deep Cycle GEL” has been added to your cart.
“Võtmehoidja II” has been added to your cart.
“Vender K7 30×90” has been added to your cart.
“Õhutusava kate Attwood 441x69mm valge” has been added to your cart.
“Vender 55×73 must” has been added to your cart.
“Kajutivalgusti LED slim 120mm” has been added to your cart.
“Vender K2a 12×55 valge” has been added to your cart.
“Paadivaip Anchor 450×610” has been added to your cart.
“Läbiviik 1/2″ roostevaba” has been added to your cart.
“Outils Oceans vintsi käepideme tasku 2tk” has been added to your cart.
“Ankru rullik 730mm” has been added to your cart.
“Veepaak kott 150L” has been added to your cart.
“Outils Oceans fallitasku 31x30x10cm” has been added to your cart.
“Victron Energy 165Ah 12V Deep Cycle AGM” has been added to your cart.
“Kett 10mm 4m galv. ISO4565” has been added to your cart.
“Plaatvender 20×50 must-hall” has been added to your cart.
“Paadisilla vender 2tk 100x14x6” has been added to your cart.
“Vender 55×73 must” has been added to your cart.
“Gaasipliit Eno Gascogne LYX” has been added to your cart.
Trudesign läbiviik 1″
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings. TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.
Saadavus: Laos olemas
Tootekood: TD90422
Kirjeldus
TruDesign Skin Fittings are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic
When used in below waterline applications, a Ball Valve should be directly connected for safety and compliance to relevant marine standards.
- Manufactured from a glass-reinforced nylon composite – High strength and light weight
- Compatible with all hull types – Can be used on aluminium, steel, wood or GRP hulls
- Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
- Chemical resistant – Impervious to diesel, petrol and antifouling paints
- UV resistant – Will not degrade or discolour with ultraviolet light from the sun
- High quality surface finish – Will not discolour with green film as similar bronze fittings do
- Paintable – Can be painted with all types of antifouling
Related Products
